Shand & Jurs

Flame Arresters

94306 Vertical Flame Arrester 94306
Vertical Flame Arrester


Stop flame propagation end of the line on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
   

  94307 Horizontal Flame Arrester 94307
Horizontal Flame Arrester


Stop flame propagation in-line on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
   

94308 Miniature Flame Arrester 94308
Miniature Flame Arrester


Small storage tanks and drums where low flash point solvents must be protected against flame from exterior sources of ignition.
   

  94309 Flame Arrester (Plate Element) 94309
Flame Arrester (Plate Element)


Quenches the flame front by cooling the flame to below its ignition temperature.
   

94406 Vertical Inline Deflagration Flame Arrester 94406
Vertical Inline Deflagration Flame Arrester


Stop flame propagation end of the line on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
   

  94307 Horizontal Inline Deflagration Flame Arrester 94407
Horizontal Inline Deflagration Flame Arrester


Stop flame propagation in-line on low pressure tanks or piping systems containing flammable liquids or solvents having a low flash point.
   
 
   
94550 Combination Flame Arrester and Free Vent 94550
Combination Flame Arrester and Free Vent


Provides both positive flame stop and maximum venting in a compact fitting.
   

  94560 Combination Conservation Vent and Flame Arrester 94560
Combination Conservation Vent and Flame Arrester (2"- 4" Sizes)


Maximum flow capacity, minimum leakage and a positive flame stop on low pressure tanks containing flammable liquids or solvents having low flash points.
   

94570 Combination Conservation Vent and Flame Arrester 94570
Combination Conservation Vent and Flame Arrester (2"-12" Sizes)


Pressure and vacuum relief, as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flash point.
   
  94580 Combination Emergency Vent and Flame Arrester 94580
Combination Emergency Vent and Flame Arrester


Emergency pressure venting as well as positive flame stop on low pressure tanks containing flammable liquids or solvents having a low flashpoint.
   


94570 Combination Conservation Vent and Flame Arrester 94390
Arrester Bank EZ-Out


Designed to allow for easy inspection & removal of arrester tube banks
   

 



         
L&J Technologies or any of it's subsidiaries assume no responsibility and shall not be liable for any damage, injury or death caused by the mis-application or improper installation of the products that it provides. Installation shall be per manufacturer's instructions in accordance to any applicable local, state or federal regulations. It is the responsibility of the purchaser to ensure these guidelines are followed and that the products are applied properly.