Detonation Flame Arresters
|
|
- Withstands instantaneous pressure at the flame front in excess of 500 psig
- Tube bank design ensures consistent functioning
- Carbon steel or 316SS housing construction, 316SS tube bank
- Optional fittings for pressure taps or temperature probes
- Standard drain plug
|
Model |
Agency Approvals |
94311 |
NEC GRP D / F.M. |
94312 |
NEC GRP D MARINE / F.M., UCG |
94313 |
NEC GRP C & D / F.M. |
94314 |
NEC GRP C & D MARINE / F.M. |
The Shand & Jurs Detonation Flame Arresters provide protection against flame propagation through piping runs and vapor recovery systems, while allowing maximum flow efficiencies. This design quenches a flame front approaching from either direction, even if it has transitioned to a detonation. The Arresters contain a detonation while retaining the integrity of both the arresting element and the housing. This is ensured by the design of the passages in the tube bank and the detonation resistant construction.
Standard construction of the housing is available in Carbon Steel or 316 Stainless Steel. The tube bank is Stainless Steel throughout. Special construction materials to withstand the corrosive actions of some vapors and atmospheric conditions are available upon request.
These models are available in a range of sizes from 2" through 24". Additional sizes available upon request. Standard connections are ANSI 150lb. or 300lb. Class raised face flanges.
|
|
View Data Sheet (.PDF) 
View All Data Sheets
Request a Quote
Contact for more information
< Back To Detonation Arresters
See Also:
94306 Vertical Flame Arrester
94406 Vertical Inline Deflagration Flame Arrester
|