L&J Technologies
L&J engineering | Shand & Jurs | Shand & Jurs Biogas | GPE | Delavan | Omnitrol



Loading

evo 2600SW Stilling Well Adapter

L&J engineering MCG 5101 Wireless Remote Station
  • Non Contact Level Gauging

  • Fits into existing 1.5" NPT Nozzles

  • Tank Specific Adapter Lengths



Upgrading an existing float and tape gauge with the evo 2600 radar gauge is simple and convenient.

L&J Engineering has made replacing existing float and tape gauges with radar level gauging technology simple and convenient with the all new evo 2600SW Stilling Well Adapter.

With the evo 2600 and evo 2600SW Stilling Well adapter, the evo can easily fit into an existing 1.5" nozzle for the float and tape gauge. The major benefit is there's no need to add additional nozzles to an existing storage tank. This will provide you with accurate non-contact FMCW radar level gauging, saving you maintenance time, money and resources.
 
Existing float
and tape gauge
Radar gauge using
existing nozzle


L&J Engineering has made replacing existing float and tape gauges with radar level gauging technology simple and convenient with the all new evo 2600SW Stilling Well Adapter.

With the evo 2600 and evo 2600SW Stilling Well adapter, the evo 2600 can easily fit into an existing 1.5" coupling for the float and tape gauge so there's no need to add additional nozzles to an existing storage tank. The evo 2600SW comes in sections that are easily coupled together with a threaded coupling piece. These sections are then lowered down into the tank section by section until the evo 2600SW is finally coupled to your evo 2600 radar gauge. This will provide you with non-contact FMCW radar gauge technology in your existing 1.5" (minimum) nozzle on your storage tank.

Installation for the evo 2600SW further proves how L&J engineering continues to evolve the level gauging market. The evo 2600SW can be installed while the tank is in-service so there is no need to take your tanks out of service to add additional nozzles for mounting radar gauges.

evo 2600 Radar Gauge

The evo 2600 Radar Gauge is the latest product in L&J Engineering's new evolution series of radar level gauges which are leading the industry with innovative new features and benefits not found in other products. The evo 2600 uses L&J's latest and most technologically advanced radar technology to deliver 3mm Accuracy in a wide variety of applications at a competitive cost. The evo 2600 uses FMCW (Frequency Modulated Continuous Wave) technology operating in the 26GHz frequency band to ensure that it delivers both accuracy and reliability in a wide variety of level gauging applications. This technology is designed, tested and manufactured in the USA, ensuring a high quality and reliable product.


Stilling Well Cover

Introducing The Only Radar Gauge That Includes A Special Stilling Well That Can Penetrate The Internal Floating Roof And Provide Accuracy Of 3mm.

Your options to upgrade to radar level gauging on an existing tank have been limited. You could take a tank out of service, install a dedicated stilling well and new nozzle on the fixed roof to accommodate a radar gauge. Or you could install a radar gauge on an existing gauge pole. These solutions are time consuming, expensive and carry a degree of risk ...until now.

More information >