MCG 350 Average Temperature Probe

L&J engineering MCG 350 Average Temperature Probe

  • High Accuracy (+/-0.5°F) Temperature Measurement

  • Temperature Averaging

  • Temperature Conversions


Average Temperature Probe
The MCG 350 (ATP) represents state-of-the-art temperature measurement, and is accepted worldwide to use as a standard for custody transfer inventory and corrected volumes. The MCG 350 Averaging Temperature Probe (ATP) allows gauges and transmitters to sense temperature through the change of resistance in the probe. The MCG 350 possesses a series of temperature sensitive elements which all extend to the bottom of the probe. The MCG 350's multiple element probe allows the gauge to select the longest element covered by the product, providing the most accurate temperature reading.

Resistance Temperature Detector
The Resistance Temperature Detector (RTD) measures multiple spot temperatures by outputting a resistance change to a gauge or transmitter. This change in resistance, which is directly proportional to temperature, is detected by a precision input bridge circuit in the transmitter. In addition to two element leads, a third reference lead is provided. The reference lead is used to remove lead wire resistance from the measurement of the temperature elements.

Average Temperature Converter
The MCG 2350 is a stand-alone average temperature converter. Accepting its input from an average temperature probe with up to 14 elements, the unit multiplexes these inputs to give a digital output that corresponds to the product temperature. The MCG 2350 is available in two resolution ranges (0.1° C and 0.01° C). The housing is an explosion proof enclosure and includes a critical intrinsic safety (I.S.) barrier, allowing for the use of either explosion proof probes or I.S. probes. The MCG 2350 is normally connected directly to other L&J Engineering models via a serial connection, to give the transmitter average temperature capabilities. The MCG 2350 is UL/C-UL and ATEX/CENELEC Approved.