L&J Technologies
L&J engineering | Shand & Jurs | Shand & Jurs Biogas | GPE | Delavan | Omnitrol



Loading

Captrol Integral 500

Delavan CAPTROL Integral 500 R.F. Capacitance PDF R.F. Capacitance On/Off Switch for powder bulk solid and liquid applications
  • Integral or remote mount electronics

  • On-board microcontroller

  • One-touch button calibration

  • Built-in "self diagnostics"


Delavan's Captrol 500 is a cost effective Microcontroller Based R.F. Capacitance On/Off Switch used in powder bulk solid and liquid applications.

"One-Touch" Button Calibration
With the utilization of our Microcontroller and Delavan's unique Auto-Cal algorithm, calibration is accomplished with a momentary touch of a button. No special tools, complicated procedures or valuable time is needed.

Principle of Operation
The Captrol 500 Microcontroller Based Point Level Switch consists of solid state electronics mounted in a cast aluminum explosion proof enclosure. The rugged sensing element utilizes a driven guard designed to eliminate the effects of material build-up or coatings that may cause false signals.

The sensing element's "active" section is energized with a R.F. (Radio Frequency) signal approximately 2mHz. When the process level changes, a change in capacitance occurs resulting in a change in frequency. This change in frequency is compared to a preset value and after amplification the signal is used to actuate a relay